7 LEDs 7000K High-power Strong Light USB Rechargeable Outdoor Fishing Waterproof Headlight (Headlamp+USB Cable) (YWXLight)

Κατόπιν παραγγελίας (7-15 εργάσιμες ημέρες)
14.24
(με ΦΠΑ)
SK1601729
+
Ποσοτικές εκπτώσεις:
Ποσότητα 5+ 10+ 30+ 50+ 100+
Τιμή 12.25 11.68 11.11 9.97 8.69
  • Διαθεσιμότητα Προϊόντος
  • Ερώτηση για το προϊόν
  • Δωρεάν Αποστολή άνω των 80€

Περιγραφή

Product parameters:
LED lamp beads: 3xT6+2xXPE+2xCOB
Number of lamp beads: 7
Color temperature: 7000K
Material: ABS+Aluminum Alloy
Battery: 2x18650 lithium battery
Charging interface type: MICRO USB
Input: 5V/1A
Illumination gear: Right button: 3T6 white light, 2XPE white light, 5 light white light, 5 light white light flash; Left key: 2COB white light intensity, 2COB white light weak,-2COB red light, -2COB red light flash.
Whether to adjust the focus: no
Lighting distance: 200-300 meters
Application areas: cycling/expedition/camping/climbing/running/etc
Waterproof rating: IPX5
Standard color: black and blue

Instructions for use:
1. Check the battery: make sure that the battery is charged and the flashlight is installed in the correct direction;
2. When using the headlight, choose according to the voltage and battery requirements of the torch. Do not use it indiscriminately to prevent the circuit board from burning. Do not use batteries of different models and voltages at the same time;
3. In use, when the brightness of the headlight changes significantly, turn off the headlight to prevent over-discharge of the battery and charge it in time; pay attention to the waterproof, moisture-proof, drop-proof, etc. of the battery, and charge according to the charging speed of the charger , After the indicator light changes, take it out in time, don't overcharge;
4. If the battery is not used for a long time, the battery should be fully charged and taken out for storage. Normally, it should be charged and discharged again in about three months to avoid chemical corrosion;
5. Keep the inner wall of the lamp cup clean. Do not wipe it with your hands or hard objects. To clear the fingerprints on the lens, you can wipe it gently with a cotton swab dipped in lens cleaner;
6. Do not keep the headlamp in contact with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the headlamp;
7. Non-professionals should not disassemble it to prevent damage to the circuit board structure.

Sales Banner

710.000 avalaible products

Social Banner Mini

Εγγύηση