0.8ton Car Labor Saving Hand Cranked Lever Stand Scissor Jacks

1. Applicable models: for cars, roadsters, SUVs, etc
2. Thickened and widened base plate ensures a safe foundation
3. Steel plate with strong load bearing capacity and long service life
4. Size: about 320 x 65 x 85mm
5. Weight: about 1150g

Instructions for use:
1. Before lifting, park the vehicle on a level hard surface, tighten the handbrake to stop the wheels from moving, turn on the danger warning sign
2. Block the wheel diagonally opposite to the replacement tire, loosen the replacement nut, but do not unscrew it
3. Remove the jack and use a rocker or wrench to raise the jack to the proper height first
4. Place the jack under the jacking part specified by the automobile manufacturer, turn the handle clockwise to make contact between the jack saddle and the jacking part, and check whether the contact is safe and reliable
5. Then crank the handle to lift the vehicle to the appropriate height, replace the tires and tighten the nuts

Caution:
1. Do not overload the use of
2. In order to ensure the normal use of the jack, please keep the jack threads clean and lubricated, each time before use, please wipe on the screw enough oil
3. This product can only support, can not be used as a fixed support, support the vehicle, it is strictly prohibited to enter the undercarriage
4. In the process of supporting the tilt immediately stop using, adjust the position and then use again